Get up in the world with our range of Work Platforms, Safety Cages and Picking Cages which are manufactured for most forklift quick hitch arrangements. The range of platforms and cages are suitable for a wide variety of applications from under ground operations such as mining and civil works to agricultural industries like fruit growers or general elevated works. Most platforms are suitable for a maximum of two people. Galvin Engineering always recommends you check your vehicle’s specifications and with the local Regulatory Authority like WorkCover to ensure any specific laws are covered when using personnel cages fitted to forklifts or cranes.
Type: FWP 25 Work Platform
The type FWP 25 Work platform has been designed to safely carry out tasks of short duration and occasional usage, such as maintenance or stocktake.
Manufactured strictly in accordance with AS 2359.1 the type FWP 25 Work Platform is suitable for a maximum of two people. This unit is supplied standard as a “Flatpack” (1230 x 1150 x 200mm), or may be fully assembled upon request.
SPECIFICATIONS:
- Safe Working Load 250kg
- Unit Weight 110kg
- Pocket Size 160 x 60mm
- Pocket Centres 640mm
- Zinc Plated Finish
- Supplied with Locking Pins
NOTE: The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than 1800kg for a counterbalanced type or 1080kg for a straddle type forklift.
Type: WP-MS Work Platform
The type WP-MS Work Platform has been designed to safely carry out tasks of short duration and occasional usage, such as maintenance or stocktake. Manufactured in strict accordance with AS2359 suitable for a maximum of two people, the WP-MS cage has full mesh panels, eliminating any possibility of objects falling from the cage. Supplied standard as “flatpack” for on site assembly, or may be supplied fully assembled upon request.
SPECIFICATIONS:
- Safe Working Load 250kg
- Unit Weight: 122kg
- Fork Pocket Size: 160 x 60mm
- Pocket Centres: 640mm
- Supplied with Locking Pins
- Zinc Plate Finish
NOTE: The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than 1860kg for a counterbalanced type or 1116kg for a straddle type forklift.
Type: WP Work Platform
The WP is a fully welded work platform, with a removeable rear protection panel. Work platforms are designed to safely carry out tasks of “short duration” and “occasional usage”, such as maintenance or stocktake.
Manufactured strictly in accordance with AS 2359.1 the WP platform is suitable for a maximum of two people.
SPECIFICATIONS:
- 250kg Safe Working Load
- Unit Weight 115kg
- Paint Finish
- Supplied with Locking Pins
NOTE: The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than 1825kg for a Counterbalanced type or 1095kg for a straddle type forklift.
Optional harness anchor bracket available.
Type: WP-OP Picking Cage
Type WP-OP Order Picking Cage, suitable strictly for “Order Picker” or “Stock Picker” fork trucks.
SPECIFICATIONS: (Standard Unit):
- Safe Working Load 1000kg
- Load Centre 600mm
- Unit Weight 180kg
- Handrail Height of 1000mm
- Pocket Size 140 x 65mm
- Pocket Centres 560mm
Type: WP-OPG Picking Cage
Built to the same dimensions as the WP-OP, but also fitted with a full width outward opening gate, enabling access to stock where required. Suitable strictly for “Order Picker” or “Stock Picker” fork trucks.
SPECIFICATIONS: (Standard Unit):
- Safe Working Load 1000kg
- Load Centre 600mm
- Unit Weight 168kg
- Handrail Height of 1000mm
- Pocket Size 140 x 65mm
- Pocket Centres 560mm
