Make light work of small lifting jobs with our range of quick hitch Jibs which are an affordable Single Hook Point Jib available with several different Safe Working Load (SWL). Quick hitch Jib attachments are individually designed to suit the carriage configuration on most model telehandlers. Galvin Engineering always recommends you check your vehicles specifications and with the local Regulatory Authority like WorkCover to ensure any specific laws are covered when using jibs fitted to forklifts.
Jib Specifications
NOTE: When selecting a jib attachment check the pocket centres of the jib you wish to order. Those noted with the prefix “SF”, “ST” and “SJW” are fitted with wide pockets, and generally suit forklifts fitted with special hydraulic tine positioners.
The lift capacities stated are a structural rating for the jib only, and make no claim as to the suitability of the forklift. Actual forklift capacity may be less than the structural capacity of the jib. Check with the forklift supplier for actual working capacities.
In accordance with AS2359.1, when lifting with a jib attachment, the net lifting capacity should be 0.8 times the rating of the forklift, to allow for a swinging load.
The type FJCS25 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the Fork Tines and secure with safety chain.
The type SFJS2.5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.
The type FJCL25 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended, allowing for long reach lifts. Simply slide onto the Fork Tines and secure with safety chain.
The type SFJL2.5 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.