Skip to main content

Keep it safe and dry with our range of Spill Bins which provide complete protection against damaging and costly chemical spills and are available to cater for one, two or four drums. Timber pallets will fit within the raised skirt, or drums can be placed directly on the support bars and the close spacing support bars allow for large or small drums up to 1000kg or 2000kg SWL. All models have a spill capacity of at least 110% containment of the largest drum in accordance with Australian Standards.

Type: SL1 / SL2 / SL4 Spill Bins

The East West Engineering range of SL Spill Bins provide complete protection against damaging and costly chemical spills and are available to cater for one (1), two (2) or four (4) drums. Also available to suit the 1000 litre Intermediate Bulk Containers – refer SL-IBC.

Close spacing support bars allow for large or small drums up to 2000kg SWL. If required, timber pallets will fit within the raised skirt, or drums can be placed directly on the support bars.

All models have a spill capacity of at least 110% containment of the largest drum in accordance with Australian Standards, being classified as “portable” units.

Type: SLC1 / SLC2 / SLC4 Spill Bins

Similar to the type SL Spill Bins, the SLC Spill Bins have the extra advantage of being partly enclosed back and sides with a chain at the front to secure the drums. This type of Spill Bin is available to cater for one (1), two (2) or four (4) drums.

SPECIFICATIONS:

  • Safe Working Load: 2000kg
  • Finish is Galvanised (all models)

Type: SL-IBC Spill Bin

The SL-IBC Spill Bins have been specifically designed for IBC’s (Intermediate Bulk Containers), and are available in 3 different sizes to suit most IBC’s on the market. All units have been designed with close spacing support bars.

All type SL-IBC Spill Bins have a spill capacity of at least 110% of the IBC holding capacity in accordance with Australian Standards, being classified as “portable” units.

SPECIFICATIONS:

  • Safe Working Load: 2000kg
  • Finish is Galvanised.

Type: RS-IBC Spill Bin

Similar to the SL-IBC Spill Bin, this unit provides a support frame which allows the IBC to be in a raised position, useful for decanting directly from the IBC, or allowing easy access for hose couplings to the drain valve. This unit is available in 3 different sizes to suit most IBC’s on the market.

All type RS-IBC Spill Bins have a spill capacity of at least 110% of the IBC holding capacity in accordance with Australian Standards, being classified as “portable” units.

SPECIFICATIONS:

  • Safe Working Load: 2000kg
  • Additional support tray also supplied.
  • Finish is Galvanised.

Pin It on Pinterest